Vista 64-bit support - Pre-release instructions

Official public notices by NaturalPoint Staff. (read only area)
Post Reply
VincentG
Posts: 7728
Joined: Mon Jul 17, 2006 5:00 am
Location: Corvallis, Oregon

Vista 64-bit support - Pre-release instructions

Post by VincentG »

Please note that this is very beta support.....

1 � Download and install the latest version of the TrackIR software,

http://www.naturalpoint.com/trackir/06- ... nuals.html

2 - Copy the following files to the system desktop, and extract,

http://media.naturalpoint.com/software/ ... rs_pre.zip

3 - Copy the extracted files to the following location; C:\Program Files\NaturalPoint\TrackIR4\Drivers (If asked overwrite the files)

4 - Plug in TrackIR hardware to USB port.

5 - When the hardware wizard asks for drivers, point to file location that you copied the files to (C:\Program Files\NaturalPoint\TrackIR4\Drivers)

6 - If Vista does not ask for driver file location, Right Click on Computer -> Select properties -> then on the left hand side select Device Manager.-> Under DM -> Select Universal Serial Bus Controllers -> Then right click on the TrackIR -> Select update driver -> then point to the file location for the copied drivers.

7 - Start the TrackIR software

8 � You should now have support for TrackIR within 64-bit Vista

9 � If you have any issues with the drivers, please email support@NaturalPoint.com
Birch
Posts: 1139
Joined: Thu Jan 30, 2003 5:00 am
Location: Corvallis, Oregon

Re: Vista 64-bit support - Pre-release instruction

Post by Birch »

Update : There is also a beta version of the installer with the Vista drivers available now.

Please visit the download section of the TrackIR website if you would like to use it instead : Version 4.1.030 - B (beta 1)
Post Reply