GPLshift v0.710 Out
GPLshift v0.710 Out
oops, It seems I have forgotten to annonce that I have released 0.710 with add of TIR DOF Y support. (May 28) for GPL
JSJ
http://www.gplshift.dk/
JSJ
http://www.gplshift.dk/
Re: GPLshift v0.710 Out
Thanks JSJ ! Yes, there are people here looking for your improvements/additions.
I know I speak for many.
Thank you.
Rushman
I know I speak for many.
Thank you.
Rushman
Re: GPLshift v0.710 Out
Hi JSJ,
I appreciate your work on GPL since your beginning.
I just installed GPL (inluding that GPLEA '67 high poly cars mod) and GPLshift 0.710 again and wanted to see how the TiR vector enhancement works.
In short words: EXCELLENT!!!
When taking your time to edit the .ini-file, one really gets a good result. I would like to say, that, if I move the view on the x-axis, I cannot turn the head to look left/right. Wich means either move your head "like an agyptian " on the x-axis or look left/right, you cannot do both. Or am I doing something wrong?
Furthermore: I you possibly could implement a "roll"-view; I guess everybody would give you 11 out of 10 points
I appreciate your work on GPL since your beginning.
I just installed GPL (inluding that GPLEA '67 high poly cars mod) and GPLshift 0.710 again and wanted to see how the TiR vector enhancement works.
In short words: EXCELLENT!!!
When taking your time to edit the .ini-file, one really gets a good result. I would like to say, that, if I move the view on the x-axis, I cannot turn the head to look left/right. Wich means either move your head "like an agyptian " on the x-axis or look left/right, you cannot do both. Or am I doing something wrong?
Furthermore: I you possibly could implement a "roll"-view; I guess everybody would give you 11 out of 10 points
-
- Posts: 4
- Joined: Wed Nov 30, 2005 5:00 am
- Location: Bloomington, Indiana, USA
Re: GPLshift v0.710 Out
Hi JSJ,
I am trying to get GPLShift to work with my new TrackIR4 and keep getting a CTD from GPL when i try to run it after i patch it.
I changed the settings in the 'ini' file. any suggestions?
I am trying to get GPLShift to work with my new TrackIR4 and keep getting a CTD from GPL when i try to run it after i patch it.
I changed the settings in the 'ini' file. any suggestions?
Re: GPLshift v0.710 Out
Thanks JSJ, much appreciated.
-
- Posts: 4
- Joined: Wed Nov 30, 2005 5:00 am
- Location: Bloomington, Indiana, USA
Re: GPLshift v0.710 Out
mine is already set to '0'.
Re: GPLshift v0.710 Out
Thanks guys
I am working with update of v0.710 and have discoved a error in the "ViewCarEngine&RearWheel = 1" support (CTD)
so change it to "= 0"
Any luck? lou_magyar
BTW v0.720:
Will have a automatic detecting & support of TrackIR
(no need for "LookAroundMode = 1.TIR" anymore)
You can use both the TIR & Buttons in same time
e.g. user TIR in Look L/R 0-45 degress and button(s) in quick 75/122deg. view
JSJ
[ November 30, 2005, 01:49 PM: Message edited by: JSJ ]
I am working with update of v0.710 and have discoved a error in the "ViewCarEngine&RearWheel = 1" support (CTD)
so change it to "= 0"
Any luck? lou_magyar
BTW v0.720:
Will have a automatic detecting & support of TrackIR
(no need for "LookAroundMode = 1.TIR" anymore)
You can use both the TIR & Buttons in same time
e.g. user TIR in Look L/R 0-45 degress and button(s) in quick 75/122deg. view
JSJ
[ November 30, 2005, 01:49 PM: Message edited by: JSJ ]
Re: GPLshift v0.710 Out
quote:Originally posted by lou_magyar:
mine is already set to '0'. Strange
Can you send me your gplshift.ini, or show it here
What GPL version do you have (v1.2.0.1/1.2.0.2/Demo2004, UK/US/SP/ etc)
Little Test:
Move gplshift.dll to another dir. still CTD?
JSJ
jsj@gplshift.dk
[ December 01, 2005, 03:12 AM: Message edited by: JSJ ]
mine is already set to '0'. Strange
Can you send me your gplshift.ini, or show it here
What GPL version do you have (v1.2.0.1/1.2.0.2/Demo2004, UK/US/SP/ etc)
Little Test:
Move gplshift.dll to another dir. still CTD?
JSJ
jsj@gplshift.dk
[ December 01, 2005, 03:12 AM: Message edited by: JSJ ]
-
- Posts: 4
- Joined: Wed Nov 30, 2005 5:00 am
- Location: Bloomington, Indiana, USA
Re: GPLshift v0.710 Out
moving the gplshift.dll indeed prevents the CTD - but trackIR does not work.
There is something going on when i get into the car. up until that point, it behaves normally. as soon as i try to get into the car, the monitor resolution changes <click> and i get a CTD. without the DLL, there is no resolution change and no CTD.
is there an undocumented requirement that GPL be run in a window? or that the GPL resolution be the same as the monitors?
I am running the full USA version, from CD (yeah, i've had it since 1998) with 1.2.0.2 patch, and using the Bandwidth patch, option 3, and TrackIR4.
here is my gplshift.ini file. i removed all the comments (those are great BTW) to make it smaller.
===============
INI v0.710 - DO NOT chance anything on this line!
[ Shifter Unit ]
Shifter_Model = NONE
Shifting_Behaviour = 1
Switch_Between_Modes = OFF
[ Clutch Device ]
Clutch_Threshold = 0
Clutch_Shift_Sound = OFF
[ CAR RESET ]
Button_Number = OFF
[ REPLAY START/STOP ]
Button_Number = OFF
[ LOOK AROUND ]
LookAroundMode = 1.TIR
Look_Left45d_Button =
Look_Left73d_Button =
Look_Left122d_Button =
Look_Right45d_Button =
Look_Right73d_Button =
Look_Right122d_Button =
LookLeftRightDeadZone = 0
LookLRStartAngle = 0
LookLRMaxAngle = 46
Look_Up_Down = 1
ReCenter =
ViewCarEngine&RearWheel = 0
[ ZOOM ]
Zoom_In_Out_Mode = OFF
Zoom_Out_Button =
Zoom_In_Button =
Zoom_Reset_Button =
Zoom2UserDefineFOV_Butt =
UserDefineFOV = 3FAE3DA8
UserDefineSOV = 3FAE3DA8
[ DRIVER VIEW ]
Up&Down = 0
Forward&Back = 0
[ TrackIR LIFT ARM ]
LiftRightArmLevel = 0
[ SEND CHAT MESSAGE ]
Send_Message_Mode = OFF
send_"PO"_button =
send_"PI"_button =
send_"Sorry!"_button =
send"No Problem"button =
[ VOLUME CONTROL ]
Volume_Control_Mode = OFF
Volume_Up_button =
Volume_Down_button =
Volume_Mute_button =
Volume_Normal_button =
[ GPL DISPLAY ]
Set_FPS_Display_On = 0
[ GPL AXIS ]
Share_All_16_AXIS = 0
DisableUSBshifter2AXIS = 0
==============
There is something going on when i get into the car. up until that point, it behaves normally. as soon as i try to get into the car, the monitor resolution changes <click> and i get a CTD. without the DLL, there is no resolution change and no CTD.
is there an undocumented requirement that GPL be run in a window? or that the GPL resolution be the same as the monitors?
I am running the full USA version, from CD (yeah, i've had it since 1998) with 1.2.0.2 patch, and using the Bandwidth patch, option 3, and TrackIR4.
here is my gplshift.ini file. i removed all the comments (those are great BTW) to make it smaller.
===============
INI v0.710 - DO NOT chance anything on this line!
[ Shifter Unit ]
Shifter_Model = NONE
Shifting_Behaviour = 1
Switch_Between_Modes = OFF
[ Clutch Device ]
Clutch_Threshold = 0
Clutch_Shift_Sound = OFF
[ CAR RESET ]
Button_Number = OFF
[ REPLAY START/STOP ]
Button_Number = OFF
[ LOOK AROUND ]
LookAroundMode = 1.TIR
Look_Left45d_Button =
Look_Left73d_Button =
Look_Left122d_Button =
Look_Right45d_Button =
Look_Right73d_Button =
Look_Right122d_Button =
LookLeftRightDeadZone = 0
LookLRStartAngle = 0
LookLRMaxAngle = 46
Look_Up_Down = 1
ReCenter =
ViewCarEngine&RearWheel = 0
[ ZOOM ]
Zoom_In_Out_Mode = OFF
Zoom_Out_Button =
Zoom_In_Button =
Zoom_Reset_Button =
Zoom2UserDefineFOV_Butt =
UserDefineFOV = 3FAE3DA8
UserDefineSOV = 3FAE3DA8
[ DRIVER VIEW ]
Up&Down = 0
Forward&Back = 0
[ TrackIR LIFT ARM ]
LiftRightArmLevel = 0
[ SEND CHAT MESSAGE ]
Send_Message_Mode = OFF
send_"PO"_button =
send_"PI"_button =
send_"Sorry!"_button =
send"No Problem"button =
[ VOLUME CONTROL ]
Volume_Control_Mode = OFF
Volume_Up_button =
Volume_Down_button =
Volume_Mute_button =
Volume_Normal_button =
[ GPL DISPLAY ]
Set_FPS_Display_On = 0
[ GPL AXIS ]
Share_All_16_AXIS = 0
DisableUSBshifter2AXIS = 0
==============
Re: GPLshift v0.710 Out
Hi lou_magyar
I have tested GPL 1.2.0.2 US with your gplshift.ini setup + BW v3.1 in Single/Local
Multiplay (but no other cars) and I have no problems! so I am lost here
Have you installed other GPL Tool/Util/Mod patch? e.g GEM+ (v?.?) and 65Cars and
other Carset, Sound Patch? etc
Does the CTD happen only in Single/Multplay...?
Using the unpatched rast3d7.dll?
WinXP or 2K?
EDIT:
GPL can run in a window and in full size
640x480 - 1600x1200 (and higher?) if your
monitor support it
if you select in window mode
[ Rasterizer ]
fullScreen = 0
then set windows in 16bit colours
JSJ
[ December 02, 2005, 04:11 PM: Message edited by: JSJ ]
I have tested GPL 1.2.0.2 US with your gplshift.ini setup + BW v3.1 in Single/Local
Multiplay (but no other cars) and I have no problems! so I am lost here
Have you installed other GPL Tool/Util/Mod patch? e.g GEM+ (v?.?) and 65Cars and
other Carset, Sound Patch? etc
Does the CTD happen only in Single/Multplay...?
Using the unpatched rast3d7.dll?
WinXP or 2K?
EDIT:
GPL can run in a window and in full size
640x480 - 1600x1200 (and higher?) if your
monitor support it
if you select in window mode
[ Rasterizer ]
fullScreen = 0
then set windows in 16bit colours
JSJ
[ December 02, 2005, 04:11 PM: Message edited by: JSJ ]