Shuttering with 4.1.029 & 4.1.0.30 Drivers Sets
Shuttering with 4.1.029 & 4.1.0.30 Drivers Sets
I have a Trackir 3 Pro with Vector and after installing the above listed drivers I experienced moderate shuttering/jumping in LOMAC. I'm currently running 4.1.0.28 with no problems, I disabled the true view option in my profile which produced negative results. I installed all drivers by removing the currently installed drivers via the control panel add/remove. I'm I missing something
Re: Shuttering with 4.1.029 & 4.1.0.30 Drivers Sets
There should not be any jumping around
A couple of things to try........
Remove the TrackIR software by doing the following:
a. Click "Start"
b. Click on the "Control Panel"
c. Click "Add/Remove Programs"
d. Find "TrackIR" and click "Change/Remove"
e. Once launched it will give the option to completely remove it.
f. Delete the NaturalPoint folder at the following location, C:\Program Files\NaturalPoint
g. Download and reinstall the software from the following location, http://www.naturalpoint.com/trackir/06- ... nuals.html
Also check the tracking screen, within the TrackIR software, to make sure there are only 3 green dots with no red or white artifacts.
A couple of things to try........
Remove the TrackIR software by doing the following:
a. Click "Start"
b. Click on the "Control Panel"
c. Click "Add/Remove Programs"
d. Find "TrackIR" and click "Change/Remove"
e. Once launched it will give the option to completely remove it.
f. Delete the NaturalPoint folder at the following location, C:\Program Files\NaturalPoint
g. Download and reinstall the software from the following location, http://www.naturalpoint.com/trackir/06- ... nuals.html
Also check the tracking screen, within the TrackIR software, to make sure there are only 3 green dots with no red or white artifacts.
Re: Shuttering with 4.1.029 & 4.1.0.30 Drivers Sets
Working great now. Thanks a Million!
Re: Shuttering with 4.1.029 & 4.1.0.30 Drivers Sets
Hello Vincent.
When i look in my tracking mode there is three green dot�s
and one red in the middle, if i understand you�r answer in
this thread right it should not be any red light in the screen. I have "talked" to you in privat e-mail correnspondens from sweden. And my TIR3 pro still don�t work with FSX. Is there anything with the red light mabye?
Per.
When i look in my tracking mode there is three green dot�s
and one red in the middle, if i understand you�r answer in
this thread right it should not be any red light in the screen. I have "talked" to you in privat e-mail correnspondens from sweden. And my TIR3 pro still don�t work with FSX. Is there anything with the red light mabye?
Per.
Re: Shuttering with 4.1.029 & 4.1.0.30 Drivers Sets
1 - If you are seeing the red light in the middle, and you are wearing the original Track hat, either cover up the built in reflector with a piece of tape, or try a different hat.
2 - When FSX is running, are you getting a blue light on the TrackIR?
3 - Have you tried reinstalling simconnect?
2 - When FSX is running, are you getting a blue light on the TrackIR?
3 - Have you tried reinstalling simconnect?
Re: Shuttering with 4.1.029 & 4.1.0.30 Drivers Sets
Hello again.
Yes vincent,i wear the original peaked cap from Natural Point with vector expension "antenna". In middelfront of the peak there is a reflector, and that has always been red for me in trackmode, and there has been no problem in FS 9. But as i sead before, i have all light�s i can get with FSX. Green on the top the of the "camera", four red dots two on each side, and the blue in the bottom.
And yes, i have reinstalled the simconnect file a several times. Everything seems to work correctely but no contact with FSX.....yet. I have tryed every softwere and so on.
I have disconnected firewalls and virusprogram, disconnected energisaver in the usb.So what can be wrong??
Per57.
Yes vincent,i wear the original peaked cap from Natural Point with vector expension "antenna". In middelfront of the peak there is a reflector, and that has always been red for me in trackmode, and there has been no problem in FS 9. But as i sead before, i have all light�s i can get with FSX. Green on the top the of the "camera", four red dots two on each side, and the blue in the bottom.
And yes, i have reinstalled the simconnect file a several times. Everything seems to work correctely but no contact with FSX.....yet. I have tryed every softwere and so on.
I have disconnected firewalls and virusprogram, disconnected energisaver in the usb.So what can be wrong??
Per57.
Re: Shuttering with 4.1.029 & 4.1.0.30 Drivers Sets
What firewall software is installed on your system?
Re: Shuttering with 4.1.029 & 4.1.0.30 Drivers Sets
Opsss..
I a peace of tape to cover the middle reflector on the cap,
and that solved my problem with "jumping head".
Thats good, a little bit closer. This is in FS9.
Per57
I a peace of tape to cover the middle reflector on the cap,
and that solved my problem with "jumping head".
Thats good, a little bit closer. This is in FS9.
Per57
Re: Shuttering with 4.1.029 & 4.1.0.30 Drivers Sets
I have MCAfee Security Center in my Dell laptop, but we have a wireless network, and a router with a firewall, but i don�t know what firewall it is. But i can find out.
Per57
Per57