Page 1 of 1

dwellclicker compatibility

Posted: Tue Feb 25, 2003 9:25 am
by brodan
Using trackIR for a long time. Recently downloaded 2.14. Now, couple times a week, I get an error message "dwellclicker not compatible with this version. Go to naturalpoint.com for latest dwellclicker" (not verbatim). After manually clicking OK, Naturalpoint continues to work, but Dwellclicker then shuts down. Any fix for this?

Re: dwellclicker compatibility

Posted: Fri Feb 28, 2003 1:47 pm
by Jim
Hello:

Do you have an AT unit? Does the dwell clicker work most of the time? This is a security feature in our software, if you don't have an AT system it will turn off the Dwell Clicker after a bit. Post your serial # and I can tell you what unit type you have.

Re: dwellclicker compatibility

Posted: Thu Apr 03, 2003 10:06 am
by brodan
Serial number is 001917. It's on loan to me from ALSA. I use this one at work. I also use my own at home with no problems. Dwell clicker works fine most of the time.

Re: dwellclicker compatibility

Posted: Wed Apr 16, 2003 4:49 am
by brodan
Hello? Anyone home?

Re: dwellclicker compatibility

Posted: Wed Apr 16, 2003 6:08 am
by Jim
Hello:

Sorry for the late reply, just missed this thread being updated.

That serial # should be an AT unit. It sounds like you are getting some data errors and that is causing the system to think that it is not an AT unit. This can be caused by too much interference in the Data Window under Advanced Settings or by a unit that has some fault in it.

If the problem continues we would be happy to work to get you a replacement unit. Please contact our tech support line at 888-865-5535 for more info on this.

Re: dwellclicker compatibility

Posted: Thu Apr 17, 2003 7:07 am
by brodan
The data window shows only the dot. Thanks for the phone number, but can't use a phone anymore. Any way to contact them online?

Re: dwellclicker compatibility

Posted: Thu Apr 17, 2003 11:10 am
by Jim

Re: dwellclicker compatibility

Posted: Fri Apr 18, 2003 4:06 am
by brodan
Thanks Jim.