calibration

Post Reply
jeuv
Posts: 10
Joined: Thu Mar 29, 2012 12:20 am

calibration

Post by jeuv » Thu Jul 10, 2014 1:29 am

Hello,
I have a question about calibration of the optitrack, if we don't move the cam, could we use the same calibration file or do we have to do a calibration each day?
Thanks;

bsteagal
Posts: 315
Joined: Tue Jun 28, 2005 5:00 am
Location: Albuquerque, New Mexico

Re: calibration

Post by bsteagal » Mon Jul 14, 2014 1:59 pm

Hi Jeuv

I would recommend a calibration each day... even with systems that are truss or wall-mounted there is a certain amount of drift due to wall expansion, vibration, etc. Calibration doesn't take that long to perform anymore in Motive (not like with Arena) and it will give you the best results.

Cheers!
Bryan Steagall
Owner
Kidz Korner Studio
OptiTrack Distributor
Mexico, Central and South America
505-615-2410
bryan@kkstudio.us
www.kkstudio.us

mathygreen
Posts: 1
Joined: Fri Jan 22, 2021 7:26 am
Location: united states
Contact:

Re: calibration

Post by mathygreen » Fri Jan 22, 2021 7:47 am

During camera calibration, the system computes position and orientation of each camera and amounts of distortions in captured images, and they are used constructs a 3D capture volume in Motive. Moreover, even if setups are not altered, calibration accuracy may naturally deteriorate over time due to ambient factors, such as fluctuation in temperature and other environmental conditions. This is done by observing 2D images from multiple synchronized cameras and associating the position of known calibration markers from each camera through triangulation.









.....................................
Reliable Permit Solutions, LLC

Post Reply