V120 Slim camera frame rate problem
Posted: Wed Jan 23, 2013 11:50 am
I recently purchased four V120 Slim cameras and the Tracking tool software. My problem is that two of these cameras do not run to 120 frames per second when these are set to this speed.
When I set the speed at 50%, the cameras run properly at 60 fps, but when I'm setting up to 100%, then two of them slowly decrease the speed until reaching 30 fps.
This is a serious problem when the cameras are synchronized together, because the frame rate becomes the average of all of them, which is 75fps (or at least this is what shows tracking tool) and the system works much worse than when it is manually set to 60 fps .
I am using the latest version of Tracking tool (2.5.1) and this problem occurs with any usb port, any cables, any PC, with or without HUB.
I'm trying to figure out if the problem can be resolved in some way or are the cameras to be defective.
Thanks in advance for the help.
When I set the speed at 50%, the cameras run properly at 60 fps, but when I'm setting up to 100%, then two of them slowly decrease the speed until reaching 30 fps.
This is a serious problem when the cameras are synchronized together, because the frame rate becomes the average of all of them, which is 75fps (or at least this is what shows tracking tool) and the system works much worse than when it is manually set to 60 fps .
I am using the latest version of Tracking tool (2.5.1) and this problem occurs with any usb port, any cables, any PC, with or without HUB.
I'm trying to figure out if the problem can be resolved in some way or are the cameras to be defective.
Thanks in advance for the help.