Setting up 12 v100r2 cameras to get the best volume???
Posted: Sat Apr 27, 2013 3:13 am
Hi
I have 12 v100r2 cameras with all 4.5 mm lens.
Earlier, I used to work on circular compositions...But now I am planning to get some rectangular volume and also to use my hall completely.
I have 8 stands at this point of time.
Please download the image from the below link and kindly, clarify my doubts based on that...
http://www1.datafilehost.com/d/ea1bc205
In the image what I sent there are only upper 8 cameras are mounted at 8 feet height.
And now please clarify me on following things.
Here are my doubts...
1)
In the image what I sent you, Is the yellow rectangle going to be my capture volume?
If yes... Then I think, I should maintain minimum distance between "A & Stand1" and also "A & Stand8" and so on to get maximum capture volume !
Or else...Please tell me what are exact distances should be maintained between "A & Stand1" and also "A & Stand8" according to my hall dimensions.
2)
By seeing the image what I sent you, please tell me the stand names on which lower cameras needs to be mounted ?
3)
I am clear that higher cameras needs to be mounted at 8 feet height...but am not clarified on one more thing i.e, At what height from the ground lower cameras needs to be mounted?
4)
All 8 Higher cameras needs to be mounted in portrait mode only right?
5)
All 4 lower cameras needs to be mounted in landscape mode only right?
Thanks
kraze
I have 12 v100r2 cameras with all 4.5 mm lens.
Earlier, I used to work on circular compositions...But now I am planning to get some rectangular volume and also to use my hall completely.
I have 8 stands at this point of time.
Please download the image from the below link and kindly, clarify my doubts based on that...
http://www1.datafilehost.com/d/ea1bc205
In the image what I sent there are only upper 8 cameras are mounted at 8 feet height.
And now please clarify me on following things.
Here are my doubts...
1)
In the image what I sent you, Is the yellow rectangle going to be my capture volume?
If yes... Then I think, I should maintain minimum distance between "A & Stand1" and also "A & Stand8" and so on to get maximum capture volume !
Or else...Please tell me what are exact distances should be maintained between "A & Stand1" and also "A & Stand8" according to my hall dimensions.
2)
By seeing the image what I sent you, please tell me the stand names on which lower cameras needs to be mounted ?
3)
I am clear that higher cameras needs to be mounted at 8 feet height...but am not clarified on one more thing i.e, At what height from the ground lower cameras needs to be mounted?
4)
All 8 Higher cameras needs to be mounted in portrait mode only right?
5)
All 4 lower cameras needs to be mounted in landscape mode only right?
Thanks
kraze