Interpret Calibration Results

Post Reply
ytzhang
Posts: 1
Joined: Thu Mar 27, 2014 12:27 pm

Interpret Calibration Results

Post by ytzhang » Thu Mar 27, 2014 12:46 pm

Hello!

I have setup 12 Flex 3 cameras covering a volume about 14ft-14ft-9ft. The Calibration Engine shows exceptional over result and very high overall quality. But I wonder more detailed interpretation of the results.

1. In the Calibration Engine, columns are ‘Cam’, 'Samp', 'Quality', 'Focal', 'MeanEr', 'PixelEr'. What are these standing for? The first two rows are 'Ave' and 'Wand'. All values for 'Wand' are larger than those for 'Ave'. What does this imply?

2. After clicking 'Apply results', the window of 'Calibration Result Report' has a row 'Triangulation'. What do 'Recommended 6.2mm' and 'Residual Mean Error 1.1mm' mean?

Thank you!

NaturalPoint-Dustin
Posts: 612
Joined: Tue Mar 19, 2013 5:03 pm

Re: Interpret Calibration Results

Post by NaturalPoint-Dustin » Tue Apr 01, 2014 10:33 am

Hello,

Thank you for posting on the forums. We have updated our Motive wiki. You can find all of the answers to your questions here:

http://wiki.optitrack.com/index.php?tit ... on_Results

Please let me know if you have any questions.

Best Regards,
Dustin
Technical Support Engineer
OptiTrack | TrackIR | SmartNav

Post Reply