Best Practices for PRIME 13 cameras

Post Reply
tlepp
Posts: 2
Joined: Fri Sep 23, 2016 10:02 am

Best Practices for PRIME 13 cameras

Post by tlepp »

We just upgraded our setup from Flex 13 cameras to Prime 13 cameras. I was wondering about power management with this new system. Can we keep the cameras in Hibernation mode when the studio is not in use? Or is it best to power down the switch when the system is not in use?
steven.andrews
NaturalPoint Employee
NaturalPoint Employee
Posts: 737
Joined: Mon Jan 19, 2015 11:52 am

Re: Best Practices for PRIME 13 cameras

Post by steven.andrews »

Hi tlepp,

The cameras have a very long life, even if you leave them in hibernation rather than turning them off. In hibernation they may continue to draw some small amount of power, however, so if you want to consider your power use we would suggest powering off the hubs.

I hope you find this to be useful. If you have any other technical questions, please feel free to reach out to us at help.naturalpoint.com

Best,
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
Post Reply