s250e camera stopped working

Post Reply
EladAssia
Posts: 1
Joined: Mon Oct 09, 2017 3:07 am

s250e camera stopped working

Post by EladAssia »

Hi all,

One of my s250e cameras stopped working all of a sudden - I was calibrating my camera and it just went off. Connecting the camera again didn't work. I tried to reset the switch, the computer, change cables but nothing worked. The camera has its red dot (where the number should be) blinking and some of its leds (same leds) also blink.
Any idea what to do? Is the camera dead?

Thanks,
Elad
steven.andrews
NaturalPoint Employee
NaturalPoint Employee
Posts: 737
Joined: Mon Jan 19, 2015 11:52 am

Re: s250e camera stopped working

Post by steven.andrews »

Hello EladAssia,

It sounds like your camera may be malfunctioning if you have tried swapping the cable already. The other thing you may want to test is using a different port on the switch, to rule that out as a possibility.

Please feel free to reach out to us directly so we can assist you with any necessary repairs. When contacting Support, please be sure to include the camera serial number.

Thanks,
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
help.naturalpoint.com
support@optitrack.com
halon
Posts: 1
Joined: Tue Nov 14, 2017 1:19 pm

Re: s250e camera stopped working

Post by halon »

We have a few s250e's sitting on the shelf. Happy to sell you one or more if you need them:

https://forums.naturalpoint.com/viewtop ... 63&t=14330
Post Reply