Page 1 of 1
capture volume upside down
Posted: Wed Jan 23, 2019 8:34 am
by boriswillis
My capture space is upside down and I don't know how to correct this. Motive is not able to create a skeleton even if the markers are matched and the lock icon appears. Motive is setup for T-Pose. I am using the 41 marker template. I have tried different computers. Any assistance is greatly appreciated as I have a capture session on Friday morning.
- mocap_upsidedown.PNG (124.83 KiB) Viewed 2635 times
Re: capture volume upside down
Posted: Wed Jan 23, 2019 2:50 pm
by steven.andrews
Hello boriswillis,
Thanks for reaching out to the community regarding your ground plane issue.
You may want to check our online documentation dealing with the
Calibration Squares, to determine if you have a legacy L-Frame / Calibration Square. If you are using a legacy device, the coordinate system in Motive has changed since that calibration device was in use. There is a bit of information in the documentation on compensating for the difference.
You can also
manually apply a rotation to the ground plane if you continue to struggle with this.
I hope this helps!
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
help.naturalpoint.com
support@optitrack.com