POE switch requirements for Slim 13E active system

Post Reply
will.b
Posts: 12
Joined: Wed Jul 17, 2019 1:21 pm
Contact:

POE switch requirements for Slim 13E active system

Post by will.b »

Hello,

I would like to find a lightweight POE switch to run a Slim 13e active system and would like to know the power draw of the active components.

a) What is the POE power requirement for each Slim 13e camera?

b) Does the active base station require a POE port?

c) If the active base station requires a POE port, what is its power requirement?

Thank you,
William
steven.andrews
NaturalPoint Employee
NaturalPoint Employee
Posts: 737
Joined: Mon Jan 19, 2015 11:52 am

Re: POE switch requirements for Slim 13E active system

Post by steven.andrews »

Hello William,

Thank you for reaching out to the community.

Each Slim 13E requires 8 watts through PoE.
The Active Base Station also requires PoE, but its draw should be less than 4 watts.

If you would like an example of a low profile PoE switch, you might like to check out the 8 port switch that we sell on our website.
TRENDnet TPE-TG80G

We hope this helps. If you need any further assistance, please feel free to reach out to us directly.

Best,
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
help.naturalpoint.com
support@optitrack.com
Post Reply