kneeling or lying ( stuck in mocap session )

Post Reply
ckdas.bcs
Posts: 5
Joined: Mon Jun 02, 2008 11:11 pm

kneeling or lying ( stuck in mocap session )

Post by ckdas.bcs » Fri Nov 13, 2009 9:59 pm

Is it possible to capture a kneel down motion or falling on the floor or rolling on floor with a setup where 8 cameras are placed at heights of 7 foot and 9 foot on four corners. Or is a different setup required for the cameras?

CDMoran
Posts: 12
Joined: Tue Aug 25, 2009 9:09 am

Re: kneeling or lying ( stuck in mocap session )

Post by CDMoran » Sat Nov 14, 2009 1:48 pm

For kneeling you can put the shin markers on the back of the legs instead of the front. As to laying and/or rolling on the floor I would love to know if there is some way to do this.

ckdas.bcs
Posts: 5
Joined: Mon Jun 02, 2008 11:11 pm

Re: kneeling or lying ( stuck in mocap session )

Post by ckdas.bcs » Mon Nov 16, 2009 7:20 pm

Hi Dave

Thanks for the reply.

Hey do you ever get a jitter on all the markers? I have been having a lot of problem with my body shivering.

CDMoran
Posts: 12
Joined: Tue Aug 25, 2009 9:09 am

Re: kneeling or lying ( stuck in mocap session )

Post by CDMoran » Tue Nov 17, 2009 11:57 am

I haven't seen any problem with jitter or shivering on the markers as long as I have a clean capture space with no extraneous marker data showing up. You may want to check your lighting maybe its causeing some interference with the camera LEDs.

VincentG
Posts: 7728
Joined: Mon Jul 17, 2006 5:00 am
Location: Corvallis, Oregon

Re: kneeling or lying ( stuck in mocap session )

Post by VincentG » Tue Nov 17, 2009 3:28 pm

Also it could be caused by a calibration of the cameras, that needs to be redone.

Post Reply