Lights on the unit

Post Reply
rodom
Posts: 581
Joined: Thu Jul 07, 2005 5:00 am
Location: Philomath, OR

Re: Lights on the unit

Post by rodom »

There is no way to turn it off aside from disconnecting the USB cable. The light flashes when the software it not running to let you know its in stand by mode.
Killjoy12
Posts: 3
Joined: Wed Nov 23, 2005 5:00 am

Re: Lights on the unit

Post by Killjoy12 »

Any plans to add that as an option to the software? It's becoming annoying since it faces me. Having to disconnect it would also be a pain.
Jim
Posts: 1395
Joined: Mon Oct 14, 2002 5:00 am
Location: Corvallis, Oregon
Contact:

Re: Lights on the unit

Post by Jim »

We will look into adding a control funtion for the red LED when in standby mode.
Killjoy12
Posts: 3
Joined: Wed Nov 23, 2005 5:00 am

Lights on the unit

Post by Killjoy12 »

Nice job on the unit. Is there any way to turn off the flashing green LED on the top front of the unit? It seems to flash about every 5 seconds, and I'm starting to find it distracting.
Killjoy12
Posts: 3
Joined: Wed Nov 23, 2005 5:00 am

Re: Lights on the unit

Post by Killjoy12 »

That would be great if you can do that.

Thanks for the quick response!
Scendore
Posts: 8
Joined: Tue Nov 18, 2003 5:00 am

Re: Lights on the unit

Post by Scendore »

Another little point about the LEDs...

If I don't run the software first the Blue light will flash instead of the green while in standby mode.

I would like to be able to turn that off if possible.
Post Reply