Physical configuration

Post Reply
grajay
Posts: 14
Joined: Fri Aug 11, 2006 5:00 am
Location: Bucknell, Shropshire UK
Contact:

Physical configuration

Post by grajay »

I'm interested to know whay the clip was made for the left hand side of the headset as my boom mike is also on that side (in common I believe with most other headsets - I have a Plantronics).

Does the TrackClip get in the way of the mike boom (or vice versa) please?

Thanks
Barred
Posts: 881
Joined: Mon Mar 17, 2003 5:00 am
Location: Scotland

Re: Physical configuration

Post by Barred »

The clip attaches to the slider for earphone adjustment. There is a swivel at the clip end to move the LED holder out of the way of the boom mic. There is also a swivel for adjustment of the LED holder.

I would say that becasue of the adjusters it is a bit fiddely getting the LEDs right at first. I will write a smal FAQ Setup Guide in the next few days.

I have tried it on a Grado SR80, Zalman 5.1 and an Edimentional headset all with no problems.
grajay
Posts: 14
Joined: Fri Aug 11, 2006 5:00 am
Location: Bucknell, Shropshire UK
Contact:

Re: Physical configuration

Post by grajay »

OK thanks for that - I'll see how I get along when it arrives.
VincentG
Posts: 7728
Joined: Mon Jul 17, 2006 5:00 am
Location: Corvallis, Oregon

Re: Physical configuration

Post by VincentG »

Also, here is a link to the Quick Start Guide PDF file, which has images on how to get it setup.

http://media.naturalpoint.com/files/pri ... 200612.pdf
grajay
Posts: 14
Joined: Fri Aug 11, 2006 5:00 am
Location: Bucknell, Shropshire UK
Contact:

Re: Physical configuration

Post by grajay »

Thanks Vincent.
VincentG
Posts: 7728
Joined: Mon Jul 17, 2006 5:00 am
Location: Corvallis, Oregon

Re: Physical configuration

Post by VincentG »

No issues.....
Post Reply