TrackClip Pro - how to keep dots from crossing?

gege21
Posts: 28
Joined: Thu Dec 26, 2013 12:31 pm
Location: FRANCE

Re: TrackClip Pro - how to keep dots from crossing?

Post by gege21 » Thu Dec 26, 2013 1:37 pm

Hi !

Just got a TIR5 + TCP for Christmas and I'm also asking myself how to set the green dots lights into camera view of TIR5 software.

How the green dots must be lined up into the camera view for the best results ?!

Here is what I get :

Image

Is it a correct lined up TIR5 camera with TCP ?

MikeWitham
NaturalPoint Employee
NaturalPoint Employee
Posts: 1477
Joined: Mon Nov 04, 2013 10:19 am

Re: TrackClip Pro - how to keep dots from crossing?

Post by MikeWitham » Fri Dec 27, 2013 12:06 pm

Hello gege21,

For optimal performance you want the dots to be centered. Yes, your camera seems to be set in the right position. If you need anymore help, please don't hesitate to ask.

Best regards,
Mike Witham
TrackIR Product Manager

gege21
Posts: 28
Joined: Thu Dec 26, 2013 12:31 pm
Location: FRANCE

Re: TrackClip Pro - how to keep dots from crossing?

Post by gege21 » Fri Dec 27, 2013 1:09 pm

Hello Mike ;)

Thank you very much for your quick answer.

Yes I think I have set my TIR5 and TCP in the right way but as the TCP bottom arm is a few offset by right in relation of the two others IR leds, it is enough hard to roughly centering it with these two others upper dots in the camera view.

Does the three green dots must to be lined up roughly by the mid vertical line of the camera view Windows ? or just centering as in my picture is enough good ?

Tested with two driving game, just fine for me :)

MikeWitham
NaturalPoint Employee
NaturalPoint Employee
Posts: 1477
Joined: Mon Nov 04, 2013 10:19 am

Re: TrackClip Pro - how to keep dots from crossing?

Post by MikeWitham » Fri Dec 27, 2013 1:12 pm

Hi gege21,

Having the dots close to center should work fine. It will never be perfect because you move around and don't always end up where you started. I would say the way you have it in your picture is good enough. I am glad to hear that it is working well for you!

Best regards,
Mike Witham
TrackIR Product Manager

gege21
Posts: 28
Joined: Thu Dec 26, 2013 12:31 pm
Location: FRANCE

Re: TrackClip Pro - how to keep dots from crossing?

Post by gege21 » Fri Dec 27, 2013 1:17 pm

Mike thank you very much for your accuracies !

Well now I'm going to enjoy with this new toy wich improve greatly the simulation games :D

I'm as a new little boy with 60 old age :D

A happy new year to All
Best wishes
Gerard

Post Reply