At first, thanks for you great products.
And now, I used your 8-cameras for my research about dressing motion with a vest that made of mesh.
My capture space is about 15'X15',and my camera placement is 8 sites like a circular shape, 4 of them is almost 10'height, the other is nearly 7' height. even it is different in you page's commend, but every camera can saw all of the body in the center. And my calibration is excellent everyone, but I've also rarely done a full take without seeing red body parts, the whole motion nearly 10 seconds. I have no idea about it, there are some good idea for more smooth capture?
My motion capture almost about upper body, but legs same good taken, the red body always in the arms..... I am so sorry for that but I beg you help so rush.
by the way my markers is 5/8" set
help! some problem about 8-cameras setup!
Re: help! some problem about 8-cameras setup!
When aiming the cameras, are they pointing at a single dot, in the middle of the capture volume?
Have you tried rotating the lower cameras, 90 degrees?
When calibrating the capture volume, do you have the data points being used set to 100-150, and a speed setting of medium?
When wanding, are you covering as much of the capture vlume as possible?
Have you tried rotating the lower cameras, 90 degrees?
When calibrating the capture volume, do you have the data points being used set to 100-150, and a speed setting of medium?
When wanding, are you covering as much of the capture vlume as possible?