question about usb expansion and cameras..

Post Reply
Alessia8086
Posts: 46
Joined: Thu Jan 13, 2011 7:06 am

question about usb expansion and cameras..

Post by Alessia8086 »

Hi people
one question, weve just set up our full motion capture system for the body after working for severall weeks with the face system, now we have a doubt, can we have cameras connected with the usb 2.0 extenions without delay in the acquisition?
the studio its not gigantic but still we cant connect directly all cameras wihtout extensions.
we got 2 from natural point but we're thinking to get 4 more.
thank you

Alessia
NaturalPoint - Mike
Posts: 1896
Joined: Tue Feb 01, 2011 8:41 am
Location: Corvallis, OR

Re: question about usb expansion and cameras..

Post by NaturalPoint - Mike »

There can be up to 1 5m a-b cable and 2 5m extensions between the computer and the OptiHub, for a total of 15m. You can not use extensions between the OptiHub and the individual cameras. For those cable runs you should have only a maximum of 1 5m usb cable. The reason behind this is that the OptiHubs supply a large amount of power to each camera (larger than USB standard) to adequately run their high powered mode. Extending the cables beyond 5m causes an out of tolerance voltage drop due to line length (additionally, active extension cables can increase this voltage drop by consuming power).

To maximize the capture volume size with 12 cameras, I would recommend putting the optihubs on opposite corners of the volume and running them from there. If you need to create a larger volume, it is possible to get a 3rd optihub and use 4 cameras per hub.
Alessia8086
Posts: 46
Joined: Thu Jan 13, 2011 7:06 am

Re: question about usb expansion and cameras..

Post by Alessia8086 »

thank you Mike

We have position one hub in the opposite side of the room and attach one usb extension to it goint into the computer, we will test today and let you know if we have problems :D

Alessia
Post Reply