Question about 3 Marker Calibration

Post Reply
gotoxy
Posts: 27
Joined: Tue Dec 18, 2007 7:56 am
Location: NBG; DE

Question about 3 Marker Calibration

Post by gotoxy »

Hi,
I just watched the tutorial about 3 marker calibration for the tracking tools.

How does the refine feature work in ARENA.
Seems, that it simply starts a new 'empty' calibration?

Can you please describe a step by step tutorial?
Thanks!

Best
Sven
DonBurroni
Posts: 127
Joined: Thu May 27, 2010 2:26 am
Location: Manchester, UK

Re: Question about 3 Marker Calibration

Post by DonBurroni »

Start wanding with the quality set to low.

Wand, until the cameras are all green and u have enough to calculate.

Then press calculate, wait until the cameras all say excellent,

Then change the drop-down in the wanding quality tab to medium, wait again until excellent,

Then change the drop down to high, wait , then very high until you get exceptional.

then at the end press apply.

Hope that helps
NaturalPoint - Mike
Posts: 1896
Joined: Tue Feb 01, 2011 8:41 am
Location: Corvallis, OR

Re: Question about 3 Marker Calibration

Post by NaturalPoint - Mike »

When you accept the calibration system's values, you're essentially pausing it. You can then either apply the calibration's results, or refine them, which allows the calibration utility to continue calculating and refining the calibration based on the data.
DonBurroni
Posts: 127
Joined: Thu May 27, 2010 2:26 am
Location: Manchester, UK

Re: Question about 3 Marker Calibration

Post by DonBurroni »

in the software there is no refine button, we need a manual.....
Post Reply