How can i select LAN?

NatNet, VRPN, TrackD, and Plugins
Post Reply
tjdwml
Posts: 1
Joined: Sun Jun 04, 2017 2:33 pm

How can i select LAN?

Post by tjdwml »

Hello

Sorry, My english is not good

My computer is connected 2 LAN

First is school's network IP is 10.150.3.76
Second is opti-track

I run NatNet sample client
I expect that sample is connected to opti-track network
but, sample try to connect school's network

The log is
[Client] Init detected more than 1 NIC card. Using First.
[Client] Initializing using ethernet address: 10.150.3.76

So, How can I select opti-track network?
Please.
steven.andrews
NaturalPoint Employee
NaturalPoint Employee
Posts: 737
Joined: Mon Jan 19, 2015 11:52 am

Re: How can i select LAN?

Post by steven.andrews »

Hello tjdwml,

When you are streaming data out of Motive, you should select the IP address for the school network. This will allow you to stream to other computers. Alternatively, you can select loopback in order to stream locally.
http://wiki.optitrack.com/index.php?tit ... _Streaming

The OptiTrack network should be left isolated, with nothing but the Cameras and Motive running on it.

If you need any more help with this, please feel free to contact us directly at help.naturalpoint.com

Best,
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
Post Reply