I am using TrackIR with IL2 cliff of dover.
All run smoothly, but after some times (can be minutes or longer) it acts like I cant look up anymore. It is blocking above about 45� up.
I still can look on sides and down, only looking up is limited.
I need to restart all to recover.
It does it whatever with hat or clip.
I tried to move the clip and to recenter but it doesnt solve the problem.
Camera adjustment are good as the 3 green light are right up in center.
Any clues ?
TrackIR 5 cant move upper after some times
Re: TrackIR 5 cant move upper after some times
Gib,
It sounds like you need to adjust your "pitch" within the software program. If you have not made any adjustments, just make sure that you turn off all but the "pitch" selection, set up the lower window for "pitch" and play with the lines until you get it right. "Speed" might also be a factor. Then, check all blocks, save it (either to the default or, preferably, a new title) and see how it works. You may have to go back and forth a few times, but it will be worth it in the end.
John
It sounds like you need to adjust your "pitch" within the software program. If you have not made any adjustments, just make sure that you turn off all but the "pitch" selection, set up the lower window for "pitch" and play with the lines until you get it right. "Speed" might also be a factor. Then, check all blocks, save it (either to the default or, preferably, a new title) and see how it works. You may have to go back and forth a few times, but it will be worth it in the end.
John