synchronization between cameras OptiTrack Flex:v100 R2

Post Reply
Soukaina
Posts: 7
Joined: Tue Mar 21, 2017 7:01 am

synchronization between cameras OptiTrack Flex:v100 R2

Post by Soukaina »

Hello everybody,

I have 2 camera OptiTrack Flex:v100 R2, I have compiled one of programs (MJPEG Viewer) proposed by OptiTrack , It's work with 1 camera but when i connect both of them , the first used is the first connected

how does the synchronization between the cameras work in order to use both of them? Thanks

Regards
Soukaina
Last edited by Soukaina on Wed Mar 29, 2017 11:50 am, edited 1 time in total.
steven.andrews
NaturalPoint Employee
NaturalPoint Employee
Posts: 737
Joined: Mon Jan 19, 2015 11:52 am

Re: synchronization between cameras OptiTrack Flex:v100 R2

Post by steven.andrews »

Hello Soukaina,

In order to run your two cameras together you will need to connect a cable between them, or use an OptiHub. Once synchronized, the cameras should run together as expected.
http://wiki.optitrack.com/index.php?tit ... g#OptiSync

For further questions about synchronization through the Camera SDK, you can read the "frame synchronization.txt" and look through the FrameSynchronization sample that is included with the SDK.

I hope this helps.

Best,
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
Post Reply