Hello everybody,
I have 2 camera OptiTrack Flex:v100 R2, I have compiled one of programs (MJPEG Viewer) proposed by OptiTrack , It's work with 1 camera but when i connect both of them , the first used is the first connected
how does the synchronization between the cameras work in order to use both of them? Thanks
Regards
Soukaina
synchronization between cameras OptiTrack Flex:v100 R2
synchronization between cameras OptiTrack Flex:v100 R2
Last edited by Soukaina on Wed Mar 29, 2017 11:50 am, edited 1 time in total.
-
- NaturalPoint Employee
- Posts: 720
- Joined: Mon Jan 19, 2015 11:52 am
Re: synchronization between cameras OptiTrack Flex:v100 R2
Hello Soukaina,
In order to run your two cameras together you will need to connect a cable between them, or use an OptiHub. Once synchronized, the cameras should run together as expected.
http://wiki.optitrack.com/index.php?tit ... g#OptiSync
For further questions about synchronization through the Camera SDK, you can read the "frame synchronization.txt" and look through the FrameSynchronization sample that is included with the SDK.
I hope this helps.
Best,
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
In order to run your two cameras together you will need to connect a cable between them, or use an OptiHub. Once synchronized, the cameras should run together as expected.
http://wiki.optitrack.com/index.php?tit ... g#OptiSync
For further questions about synchronization through the Camera SDK, you can read the "frame synchronization.txt" and look through the FrameSynchronization sample that is included with the SDK.
I hope this helps.
Best,
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer