Tracking Tools feature in Motive: Define Rigid Body Centre

Post Reply
MARSLab
Posts: 2
Joined: Sun Dec 29, 2013 2:31 pm

Tracking Tools feature in Motive: Define Rigid Body Centre

Post by MARSLab » Tue May 20, 2014 12:41 pm

I have recently switched from Tracking Tools to Motive. In tracking tools I had the ability to select a specific marker to be the centre location of the rigid body. I cannot seem to find this feature in Motive, has it been removed? Is there an alternate way of doing this?

NaturalPoint - Brent
NaturalPoint Employee
NaturalPoint Employee
Posts: 59
Joined: Tue Nov 20, 2012 12:40 pm

Re: Tracking Tools feature in Motive: Define Rigid Body Cent

Post by NaturalPoint - Brent » Thu May 22, 2014 9:52 am

-Select the marker you wish to be the pivot point.
-Ctrl + select the rigid body so both the rigid body and marker you want to be the pivot point are selected.
-Right click and select Set Rigid Body Pivot Point.
-To reset pivot point to original location, right click and select Reset Pivot Point.

Please let us know if you have any other questions.

Brent Mason
Technical Sales Engineer
OptiTrack

Post Reply