Hi,
I'm still learning how to use Motive and I have a problem when I record.
I recorded a scene using a single marker and a calibration with a mean error less than 1mm but after recording, I can see that a "clone" of the marker appeared.
I've attached an image where this happens.
I want to know why this happens, if it is a calibration issue or the cameras, or another problem and how can I fix this issue.
Thanks in advance.
-L
Problem recognizing more markers than there are on the actua
-
- NaturalPoint Employee
- Posts: 720
- Joined: Mon Jan 19, 2015 11:52 am
Re: Problem recognizing more markers than there are on the a
Hello lpinilla,
Thank you for reaching out to the community regarding your tracking results. This kind of issue would be difficult to diagnose here; please feel free to reach out to us at help.naturalpoint.com so we can troubleshoot together.
When contacting us, please provide a recording (.tak) showing the results from your screenshot. This will allow us to view your setup and look for possible causes.
Best,
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
Thank you for reaching out to the community regarding your tracking results. This kind of issue would be difficult to diagnose here; please feel free to reach out to us at help.naturalpoint.com so we can troubleshoot together.
When contacting us, please provide a recording (.tak) showing the results from your screenshot. This will allow us to view your setup and look for possible causes.
Best,
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer