Hi All,
I am using Motive 2, in the 3D camera view, when zooming out (via mouse wheel or keyboard) the zoom appears to have a limitation.
I have cameras approximately 400 meters appart and I cannot zoom out to see the full setup.
Is there a way to zoom out further or some kind of workaround that could help me here?
I am using a 1920*1080 monitor. Would using a higher resolution screen (e.g 3840*2160) or would just just give me a bigger viewport that I still cant zoom out any further?
Thanks for any thoughts or ideas.
Motive 2 3D camera view zoom
-
- Posts: 139
- Joined: Tue Aug 15, 2017 1:56 pm
Re: Motive 2 3D camera view zoom
Hello Lawrence,
Do you also happen to notice very small Icons while in Motive? Please try the following to see if this may help. Any screenshots of your troubles would be very helpful.
With Motive closed:
1. Right click on the Motive Icon (on your desktop before you launch the program) > Select Properties
2. Navigate to the Compatibility tab
3. Check Override high DPI scaling Behavior. Scaling performed by:
4. Select “System”
5. Press Apply
Do you also happen to notice very small Icons while in Motive? Please try the following to see if this may help. Any screenshots of your troubles would be very helpful.
With Motive closed:
1. Right click on the Motive Icon (on your desktop before you launch the program) > Select Properties
2. Navigate to the Compatibility tab
3. Check Override high DPI scaling Behavior. Scaling performed by:
4. Select “System”
5. Press Apply
All the Best,
Chris Johnson
Customer Support Engineer
NaturalPoint
Chris Johnson
Customer Support Engineer
NaturalPoint