Calibration issues

Post Reply
jofata
Posts: 1
Joined: Mon Apr 23, 2018 7:11 am

Calibration issues

Post by jofata »

Hi there,

During the calibration of our Optitrack I ran into some problems. At first the wanding results where "verry good" and I wanted to improve the results. My volume that I want to measure is about 0.5x0.5x0.5m. This is quite small and the accuracy was below 0.1mm.
However I was not able to calibrate anymore. the graph shows the results i get and I do not really understand why this is...
does anyone have an idea?

best

jofata
Optitrack_Calibration_Problem.GIF
Optitrack_Calibration_Problem.GIF (164.68 KiB) Viewed 1528 times
Post Reply