Hello
I exported C3D file from Motive tracker 2.0.2. But, I couldn’t read this file by VICON Nexus 1.8. Please tell me the appropriate setting for exporting C3D file in Motive tracker.
Any help would be appreciated.
Sincerely Yours
Ryoji
C3D export for VICON Nexus
-
- NaturalPoint Employee
- Posts: 720
- Joined: Mon Jan 19, 2015 11:52 am
Re: C3D export for VICON Nexus
Hi Ryoji,
Thanks for reaching out to the community.
By now, our C3D format is standard to what most packages should be using.
https://www.c3d.org/
If there are any settings specific to getting the data into Vicon Nexus, we are not certain what those would be. It is possible Nexus might have some proprietary requirement. I would suggest you check with Vicon to see if they know of anything that would prevent a C3D from loading into their software.
If we can do anything to help on the Motive side, please feel free to reach out to us directly for Support.
Cheers!
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
help.naturalpoint.com
support@optitrack.com
Thanks for reaching out to the community.
By now, our C3D format is standard to what most packages should be using.
https://www.c3d.org/
If there are any settings specific to getting the data into Vicon Nexus, we are not certain what those would be. It is possible Nexus might have some proprietary requirement. I would suggest you check with Vicon to see if they know of anything that would prevent a C3D from loading into their software.
If we can do anything to help on the Motive side, please feel free to reach out to us directly for Support.
Cheers!
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
help.naturalpoint.com
support@optitrack.com