Changing Calibration of an Existing Take

Post Reply
rtm_y
Posts: 1
Joined: Mon Aug 15, 2022 9:07 pm

Changing Calibration of an Existing Take

Post by rtm_y »

Hey,

I'm trying to change the calibration of an existing take in Motive 2.3.1. I've seen in the wiki and on the forum that you can do so by opening the take and then open the saved calibration file from a .cal file.

I've tried to do this but regardless of what I do the calibration of the take doesn't change - I've verified this both by looking at the perspective view in the "edit tab" and looking at the Calibration field of the take in the property tab.

Can anyone help me with this?
MocapRanger
Posts: 3
Joined: Fri Oct 07, 2022 1:39 pm

Re: Changing Calibration of an Existing Take

Post by MocapRanger »

Still a problem??

Have you tried...

Open the tak
Open the calibration file
Right click on take in data pane-->> delete 3D data
Right click the take, Rerun -->> Reconstruct (+ autolabel, solve, etc)
boldjim
Posts: 1
Joined: Fri Oct 21, 2022 4:27 am
Contact:

Re: Changing Calibration of an Existing Take

Post by boldjim »

Thanks MocapRanger, I have a similar problem and your guide helped me.
Post Reply