TrackIR 5 dead zone "not locked" P3Dv4.5

Post Reply
willig
Posts: 3
Joined: Sat Mar 28, 2020 1:38 pm

TrackIR 5 dead zone "not locked" P3Dv4.5

Post by willig »

Hi,
When using the IR-Tracker with P3Dv4.5 flight sim “running/flickering” shadow edges disturb the 3D cockpit view.

I checked if it improves with smooth, one-one or dead zone setting.
Unfortunately only pressing F9 (lock) remove the flicker immediately.
Back in the IR-Tracker mode the shadow edges and small text flickers.

Is there a good setup which keeps the Tracker locked when the head is more or less in a stable position?

Appreciate any support as this is a disturbing effect.
willig
jon.campbell
Posts: 81
Joined: Wed Mar 04, 2020 9:53 am

Re: TrackIR 5 dead zone "not locked" P3Dv4.5

Post by jon.campbell »

Hello,

Thank you for posting about your issue on the TrackIR forum. Would you be able to post a video of the problem you are experiencing? That should help figure out how to proceed.
Jon Campbell
Customer Support Engineer
TrackIR
NaturalPoint
willig
Posts: 3
Joined: Sat Mar 28, 2020 1:38 pm

Re: TrackIR 5 dead zone "not locked" P3Dv4.5

Post by willig »

Hi,
Please find attached the link to download the video file.
During recording I pressed twice F9 to freeze the view point!
I hope it helps to explain my issue with moving/flickering edges/text.
I am looking forward for a replay how to “freeze” the view point when the head position is "stable".
Rgds
Giudo

Download link
https://wetransfer.com/downloads/e195a6 ... 015/3e7860
jon.campbell
Posts: 81
Joined: Wed Mar 04, 2020 9:53 am

Re: TrackIR 5 dead zone "not locked" P3Dv4.5

Post by jon.campbell »

Hi Willig, the F9 pausing will be your best option to freeze the viewpoint with TrackIR.
Jon Campbell
Customer Support Engineer
TrackIR
NaturalPoint
willig
Posts: 3
Joined: Sat Mar 28, 2020 1:38 pm

Re: TrackIR 5 dead zone "not locked" P3Dv4.5

Post by willig »

Hi Jon,
Thanks for feedback. I guess it would be difficult to implement a smooth solution.
Post Reply