OptiTrack + Lighthouse

Post Reply
jusabiaga
Posts: 2
Joined: Fri Nov 22, 2019 10:23 am

OptiTrack + Lighthouse

Post by jusabiaga » Fri Nov 22, 2019 1:43 pm

Hi there,

Is it possible to run the OptiTrack tracking system (Flex 13 cameras) at the same time as the HTC Vive's Lighthouse one? I have tried several configurations (1.0 and 2.0 Lighthouse base stations, including using the sync cable with 1.0), but there seems to be an interference problem I haven't been able to bypass.

Has anybody done it successfully? Are they compatible? Any pointers would be greatly appreciated.

Thanks

steven.andrews
NaturalPoint Employee
NaturalPoint Employee
Posts: 532
Joined: Mon Jan 19, 2015 11:52 am

Re: OptiTrack + Lighthouse

Post by steven.andrews » Mon Nov 25, 2019 11:33 am

Hi jusabiaga,

When running the OptiTrack system, users will typically not need the Vive tracking. The motion capture is usually intended to take the place of the Vive tracking itself.

If you try to run both simultaneously, the IR from the motion capture system will likely interfere with the Vive's tracking.

Before we were compatible with the Vive, users needed to synchronize the two systems and apply an offset. We no longer support this setup, but you can try reading this old documentation regarding the synchronization to see how this used to be done.
Sync_Configuration_with_an_HTC_Vive_System

Best,
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
help.naturalpoint.com
support@optitrack.com

Post Reply