OptiTrack + Lighthouse

Post Reply
jusabiaga
Posts: 2
Joined: Fri Nov 22, 2019 10:23 am

OptiTrack + Lighthouse

Post by jusabiaga »

Hi there,

Is it possible to run the OptiTrack tracking system (Flex 13 cameras) at the same time as the HTC Vive's Lighthouse one? I have tried several configurations (1.0 and 2.0 Lighthouse base stations, including using the sync cable with 1.0), but there seems to be an interference problem I haven't been able to bypass.

Has anybody done it successfully? Are they compatible? Any pointers would be greatly appreciated.

Thanks
steven.andrews
NaturalPoint Employee
NaturalPoint Employee
Posts: 737
Joined: Mon Jan 19, 2015 11:52 am

Re: OptiTrack + Lighthouse

Post by steven.andrews »

Hi jusabiaga,

When running the OptiTrack system, users will typically not need the Vive tracking. The motion capture is usually intended to take the place of the Vive tracking itself.

If you try to run both simultaneously, the IR from the motion capture system will likely interfere with the Vive's tracking.

Before we were compatible with the Vive, users needed to synchronize the two systems and apply an offset. We no longer support this setup, but you can try reading this old documentation regarding the synchronization to see how this used to be done.
Sync_Configuration_with_an_HTC_Vive_System

Best,
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
help.naturalpoint.com
support@optitrack.com
dorgold
Posts: 1
Joined: Thu Apr 21, 2022 2:59 am

Re: OptiTrack + Lighthouse

Post by dorgold »

Hi,

picking up this thread 2,5 years later with the question if this setup - although you say it's no longer supported - would still work "unofficially" with the current generation of OptiTrack HW if one followed the information in https://v110.wiki.optitrack.com/index.p ... ive_System

Thanks a lot,
dorgold
Post Reply