Jumpy/erratic/glitchy motion

Locked
NaturalPoint.Kai
Posts: 60
Joined: Wed Sep 09, 2020 5:02 pm

Jumpy/erratic/glitchy motion

Post by NaturalPoint.Kai »

It is possible the TrackIR camera is detecting IR light interference. This could be due to sunlight through an open window, other IR light sources in the room, and/or IR light reflecting off from reflective objects in the room when using the reflector clip.
  • Right-click anywhere on the matrix then click “Camera View” and look for red dots. These are indicators of light interference and will cause problems with the camera tracking system.
  • Limit reflective objects in camera view.
  • Eye-glasses can cause interference.
  • Lower the light filter threshold in the camera settings.
  • Ideally, it should see only three green dots in the view.
Locked