Camera syncronization and GetFrameGroup()
Camera syncronization and GetFrameGroup()
Hi,
I'm trying to get frame from 3 syncronized camera.
I've read and tried the sample code "FrameSyncronization" but it seems it doesn't work because it doesn't create a FrameGroup. In fact after the command "frameGroup = sync->GetFrameGroup();" the variable framegroup is all zero.
Any suggestion on what is the problem?
Thanks a lot!!!!
I'm trying to get frame from 3 syncronized camera.
I've read and tried the sample code "FrameSyncronization" but it seems it doesn't work because it doesn't create a FrameGroup. In fact after the command "frameGroup = sync->GetFrameGroup();" the variable framegroup is all zero.
Any suggestion on what is the problem?
Thanks a lot!!!!
-
- Posts: 7
- Joined: Tue Oct 23, 2012 9:46 am
- Location: Illinois
Re: Camera syncronization and GetFrameGroup()
Hi, I have linked the cameras using the sync cables but still facing with the same problem. Did you solve this problem? Thanks
-
- Posts: 323
- Joined: Thu Oct 11, 2012 9:18 am
Re: Camera syncronization and GetFrameGroup()
What types of cameras are you guys using?
-
- Posts: 7
- Joined: Tue Oct 23, 2012 9:46 am
- Location: Illinois
Re: Camera syncronization and GetFrameGroup()
I am using two V120:SLIM cameras. Till now I still can't sync the two cameras even I use the camera sdk example program.
Re: Camera syncronization and GetFrameGroup()
Hi,
I have the same problem.
I have 3 V100:R2 cameras connected to an Optihub2 usb. I run sample FrameSynchronization but Framegroup is Zero or Empty when it is created in "frameGroup = sync->GetFrameGroup()".
It is possible Synchronization by means of 3 camera connected usb to an optihub2?
I have the same problem.
I have 3 V100:R2 cameras connected to an Optihub2 usb. I run sample FrameSynchronization but Framegroup is Zero or Empty when it is created in "frameGroup = sync->GetFrameGroup()".
It is possible Synchronization by means of 3 camera connected usb to an optihub2?
-
- Posts: 323
- Joined: Thu Oct 11, 2012 9:18 am
Re: Camera syncronization and GetFrameGroup()
Is sync->CameraCount() returning 3? Also are there markers visible to all 3 cameras when you are running the sample?
Re: Camera syncronization and GetFrameGroup()
Yes, sync->CameraCount() return 3 and markers all visible. In TrackingTools my 3 markers are visible. When I close TT and I open sample it found 3 cameras, sync->CameraCount()returned 3 but it was waiting in the loop without capture 3 synchro-frame.
Any more idea?
Thanks a lot.
Any more idea?
Thanks a lot.
-
- Posts: 323
- Joined: Thu Oct 11, 2012 9:18 am
Re: Camera syncronization and GetFrameGroup()
Can you try just using two of the cameras at a time to see if one camera is causing an issue?
Re: Camera syncronization and GetFrameGroup()
I've tried with only two cameras but with the same results...framegroup is 0.
I'm using 2 of 6 V100:R2 cameras.
Any other ideas?
I'm using 2 of 6 V100:R2 cameras.
Any other ideas?
-
- Posts: 323
- Joined: Thu Oct 11, 2012 9:18 am
Re: Camera syncronization and GetFrameGroup()
Sim,
Can you provide a bit more information about the wiring configuration of your setup? Are you using an OptiHub and/or sync cables, etc.
Can you provide a bit more information about the wiring configuration of your setup? Are you using an OptiHub and/or sync cables, etc.