cliffs of dover freeze
cliffs of dover freeze
Hi, only just got ir5 seems to work OK with BOB 2, il2, RoF and OFF but it stops working about five mins into a flight with CLoD. All the lights are on on the camera but nothing is happening and I have to restart the prog to get it working again. Any ideas out there, thanks for any help.
Re: cliffs of dover freeze
After opening up Trackir manager, click the Trackir button in the upper left hand side of the page and select "game updates". I remember having trackir problem initially and had to update as instructed for this to work properly.
Hope this helps,
cheers--sf
Hope this helps,
cheers--sf
-
- Posts: 1477
- Joined: Mon Nov 04, 2013 10:19 am
Re: cliffs of dover freeze
Hi jerryb,
Did your issue get resolved?
Mike Witham
Tech Support
TrackIR | SmartNav
Did your issue get resolved?
Mike Witham
Tech Support
TrackIR | SmartNav
Mike Witham
TrackIR Product Manager
TrackIR Product Manager
Re: cliffs of dover freeze
Sorry for the delay, no, it still freezes after about 5-10 mins.
-
- Posts: 1477
- Joined: Mon Nov 04, 2013 10:19 am
Re: cliffs of dover freeze
Hello jerryb,
This issue is pretty uncommon with CloD and there is very little information about this out there. Have you tried uninstalling and re-installing the TrackIR software? Perhaps test the issue by installing an older version of our software. I personally use v5.1.3 for testing against our newest version of the software (v5.2.2). I don't think that would be the issue but it would be very helpful in finding the cause. I would also recommend asking AVSIM, SIMHQ and 1C forums. I often consult them on tough issues because as a community they have a massive collective knowledge base.
You can download the software here:
http://media.naturalpoint.com/software/ ... .Final.exe
Best regards,
This issue is pretty uncommon with CloD and there is very little information about this out there. Have you tried uninstalling and re-installing the TrackIR software? Perhaps test the issue by installing an older version of our software. I personally use v5.1.3 for testing against our newest version of the software (v5.2.2). I don't think that would be the issue but it would be very helpful in finding the cause. I would also recommend asking AVSIM, SIMHQ and 1C forums. I often consult them on tough issues because as a community they have a massive collective knowledge base.
You can download the software here:
http://media.naturalpoint.com/software/ ... .Final.exe
Best regards,
Mike Witham
TrackIR Product Manager
TrackIR Product Manager
Re: cliffs of dover freeze
OK, I'll try that, I've also noticed that it keeps tell me that it cannot save as I'm not using alphanumeric symbols which is confusing, I reinstalled 5.2.2 and that seems to have been cured.
-
- Posts: 1477
- Joined: Mon Nov 04, 2013 10:19 am
Re: cliffs of dover freeze
Hi jerryb,
I'm glad to hear that you are up and running again!
I'm glad to hear that you are up and running again!
Mike Witham
TrackIR Product Manager
TrackIR Product Manager