Product Re-brand Announcement:
The V100:R2 is now known as Flex 3. You can learn more about the Flex 3 by following this link:
http://www.naturalpoint.com/optitrack/products/flex-3/
"V100:R2" Re-branded as "Flex 3"
-
- Posts: 609
- Joined: Tue Mar 19, 2013 5:03 pm
"V100:R2" Re-branded as "Flex 3"
Dustin
Technical Support Engineer
OptiTrack | TrackIR | SmartNav
Technical Support Engineer
OptiTrack | TrackIR | SmartNav
Re: "V100:R2" Re-branded as "Flex 3"
Hi Dustin..
besides the rebranding is there any difference in hardware capabilities?
Nildo
besides the rebranding is there any difference in hardware capabilities?
Nildo
-
- Posts: 609
- Joined: Tue Mar 19, 2013 5:03 pm
Re: "V100:R2" Re-branded as "Flex 3"
Dear Nildo,
The camera is exactly the same. The only thing we have changed is the name.
Best Regards,
The camera is exactly the same. The only thing we have changed is the name.
Best Regards,
Dustin
Technical Support Engineer
OptiTrack | TrackIR | SmartNav
Technical Support Engineer
OptiTrack | TrackIR | SmartNav
Re: "V100:R2" Re-branded as "Flex 3"
Hi Dustin.
thx for the clarification!![Smile :)](./images/smilies/icon_e_smile.gif)
btw..if u dont mind..can u please tell me the difference betweem the optihub 1 and 2? I ask because a while ago i bought 1 used system that came with the hub1, and last week i bought another "used" system but it came with hub2..
if i need to add more cameras to my setup can i use both without issues?
Nildo
thx for the clarification!
![Smile :)](./images/smilies/icon_e_smile.gif)
btw..if u dont mind..can u please tell me the difference betweem the optihub 1 and 2? I ask because a while ago i bought 1 used system that came with the hub1, and last week i bought another "used" system but it came with hub2..
if i need to add more cameras to my setup can i use both without issues?
Nildo
Re: "V100:R2" Re-branded as "Flex 3"
Hi Nildo
One of the differences is that the Optihub 2 supports the flex-13 cameras, while the Optihub1 does not.. (different power requirements) in your case, they will work just fine.. I have a mixed system too and I have no issues..
One of the differences is that the Optihub 2 supports the flex-13 cameras, while the Optihub1 does not.. (different power requirements) in your case, they will work just fine.. I have a mixed system too and I have no issues..
Bryan Steagall
Owner
Kidz Korner Studio
OptiTrack Distributor
Mexico, Central and South America
505-615-2410
bryan@kkstudio.us
www.kkstudio.us
Owner
Kidz Korner Studio
OptiTrack Distributor
Mexico, Central and South America
505-615-2410
bryan@kkstudio.us
www.kkstudio.us
Re: "V100:R2" Re-branded as "Flex 3"
Hi Brian,
Thx alot for the reply
I was using the old dlinks and the old r1 cameras, previously...and now im using the hub2 with 12 cameras r2 (now flex13), but i have one more camera id like to use so as to be a 13 camera system, initially i was having problems on the pc, it was recognizing not 12 individual cameras, but 6x2 cameras, you know two 1x , two 2x and so forth...i figured that i had to sync the 2 hubs witha sync cable, and after doing that they worked without issues, is this the correct workflow?
if so then if i need to connect the other 2 hubs, and buy more cameras, can i use the sync cables like i did the first time?
Thx alot for the reply
I was using the old dlinks and the old r1 cameras, previously...and now im using the hub2 with 12 cameras r2 (now flex13), but i have one more camera id like to use so as to be a 13 camera system, initially i was having problems on the pc, it was recognizing not 12 individual cameras, but 6x2 cameras, you know two 1x , two 2x and so forth...i figured that i had to sync the 2 hubs witha sync cable, and after doing that they worked without issues, is this the correct workflow?
if so then if i need to connect the other 2 hubs, and buy more cameras, can i use the sync cables like i did the first time?
Re: "V100:R2" Re-branded as "Flex 3"
Is the Flex v100 r2 or Flex 3 compatible with Arena 1.3.5?
I ordered and r2 off of Ebay. However, after double checking the compatibility chart I don't see Arena 1.3 for R2.
I ordered and r2 off of Ebay. However, after double checking the compatibility chart I don't see Arena 1.3 for R2.
Freelancer:Model, Rig, Animate
Extending Mocap with Ragdoll Physics, Digital Stunts
https://www.youtube.com/watch?v=h7gxPOOcoEU
VFX
https://youtu.be/3S-HL1u1TSw
Extending Mocap with Ragdoll Physics, Digital Stunts
https://www.youtube.com/watch?v=h7gxPOOcoEU
VFX
https://youtu.be/3S-HL1u1TSw
-
- NaturalPoint Employee
- Posts: 720
- Joined: Mon Jan 19, 2015 11:52 am
Re: "V100:R2" Re-branded as "Flex 3"
Hi AVTProMan,
As the online compatibility chart lists, the Flex 3 (V100:R2) is only compatible with ARENA 1.5+
If your intended application allows you to use Motive, I would suggest purchasing a new license and using the current software. You could alternatively purchase enough license updates to use a compatible version of ARENA, but please be aware that this software is retired and no longer covered by Support.
Thanks,
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
help.naturalpoint.com
support@optitrack.com
As the online compatibility chart lists, the Flex 3 (V100:R2) is only compatible with ARENA 1.5+
If your intended application allows you to use Motive, I would suggest purchasing a new license and using the current software. You could alternatively purchase enough license updates to use a compatible version of ARENA, but please be aware that this software is retired and no longer covered by Support.
Thanks,
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
help.naturalpoint.com
support@optitrack.com