Is it possible to build a custom tracking target with TrackIR 5?
I have a flight helmet I would like to build an IR LED into for tracking purposes. I really only need 2 DOF so one point tracking would be fine.
I know FreeTrack will let you do this but I see nowhere to do it in the TrackIR 5.2 software.
Thanks for any help.
Custom Tracking Target
-
- Posts: 1365
- Joined: Fri Jun 27, 2008 11:29 am
- Location: Corvallis, Oregon
Re: Custom Tracking Target
Hi Sapper,
We don't enable custom configurations for our vector tracking (the 6 DOF tracking engine), because we want to ensure that the arrangement is very accurate to ensure the best tracking. However, if you are only looking to track a single LED, you can roll back to our 4.x software, which supports that type of tracking.
We don't enable custom configurations for our vector tracking (the 6 DOF tracking engine), because we want to ensure that the arrangement is very accurate to ensure the best tracking. However, if you are only looking to track a single LED, you can roll back to our 4.x software, which supports that type of tracking.
Marketing Manager
TrackIR | OptiTrack
TrackIR | OptiTrack