Greetings,
I am just now trying to get up to speed on DCS and Falcon 4.32. I received yesterday a new TrackIR 5.
After downloading and installing the software and before changing anything in the software, I find that when facing the camera and holding very still, that the device will not stop jumping around. Pressing F12 will center the device on the grid but it immediately starts jumping violently once again.
I feel like this may indicate a faulty unit.
Has anyone experienced this? I don't know where to start with making this device work and I find the downloadable manual lacking for someone like me. Any help would be appreciated.
I videoed the screen display when this is happening if would help anyone diagnose what is happening,
Also, there is no back lighting and it is not plugged into a USB hub,
Thanks,
Steve
TrackIr Newbie
-
- Posts: 1477
- Joined: Mon Nov 04, 2013 10:19 am
Re: TrackIr Newbie
Steve,
If you could load the video that you took it would be helpful.
Regards,
If you could load the video that you took it would be helpful.
Regards,
Mike Witham
TrackIR Product Manager
TrackIR Product Manager
Re: TrackIr Newbie
Well, I have been unable to pursue things with TrackIR and flight simming in general. Now, I am trying to get back up to speed so I need to say that have made a lot of progress on my own so thanks for all of your help thus far. I am now getting into new questions but I will look in other areas of the forum to see if my issues are addressed or make new post in an appropriate area.
Thanks
Thanks
Re: TrackIr Newbie
Hi,
srayner I am experiencing the exact same problem.
How did you solve it. Is my unit broken or are there some settings I have missed?
srayner I am experiencing the exact same problem.
How did you solve it. Is my unit broken or are there some settings I have missed?
-
- Posts: 1477
- Joined: Mon Nov 04, 2013 10:19 am
Re: TrackIr Newbie
Tansu,
There was a few settings that I changed. Could you go into the camera view and tell me how many objects the software says it is tracking?
Regards,
There was a few settings that I changed. Could you go into the camera view and tell me how many objects the software says it is tracking?
Regards,
Mike Witham
TrackIR Product Manager
TrackIR Product Manager
Re: TrackIr Newbie
Hi Mike,
I will check this and report back here.
Thanks.
I will check this and report back here.
Thanks.