Hi,
I've a setup of Prime 17W cameras, and all the rigid bodies I'm working with are built from Custom Active Markers (LED's). I don't use passive/reflecting markers at all.
Does my setup should be calibrated with an Active LED Calibration Wand ?
Thanks,
Joseph
Active LED Calibration Wand when working only with Custom Active Markers (LED's)
-
- Posts: 17
- Joined: Sun Jan 05, 2020 8:52 am
-
- NaturalPoint Employee
- Posts: 720
- Joined: Mon Jan 19, 2015 11:52 am
Re: Active LED Calibration Wand when working only with Custom Active Markers (LED's)
Hi Joseph,
You can calibrate your volume using the normal passive wand. The LEDs you are using will simply track as though they are passive markers, since they should utilize continuous illumination as the passive markers do.
The active wand is more for volumes that push the limits on maximums distance, or where the cameras may not have the IR ring to emit their own light.
Best,
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
help.naturalpoint.com
support@optitrack.com
You can calibrate your volume using the normal passive wand. The LEDs you are using will simply track as though they are passive markers, since they should utilize continuous illumination as the passive markers do.
The active wand is more for volumes that push the limits on maximums distance, or where the cameras may not have the IR ring to emit their own light.
Best,
Steven
--
Steven Andrews
OptiTrack | Senior Customer Support Engineer
help.naturalpoint.com
support@optitrack.com
-
- Posts: 17
- Joined: Sun Jan 05, 2020 8:52 am
Re: Active LED Calibration Wand when working only with Custom Active Markers (LED's)
Great!!
Thanks for the assistant
Joseph
Thanks for the assistant
Joseph