Hello,
I am trying to understand the instructions for using my TrakIR Vector with the Demo of GPL.
At Natural point it says Edit the "GPLshift.ini" file. Scroll down and set "LookAroundMode = 1.TIR" (located under [ LOOK AROUND ])
Set "ReCenterButton = 1.6" (this means : use 1st. game Ctr's Button 7) (remember GPL and GPLshift counts button from 0 - 15, but Game Ctrl.device counts from 1 - 8)
I did the LookAroundMode and set it to 1.TIR
I have limited head movement in the game but what I don't understand is this second part of the instructions...
Set "ReCenterButton = 1.6" (this means : use 1st. game Ctr's Button 7) (remember GPL and GPLshift counts button from 0 - 15, but Game Ctrl.device counts from 1 - 8)
What/where is the "ReCenterButton =1.6 ????
Is this why my Logitech MOMO shifter doesn't work and the buttons don/t work nor the paddles??? HELP!!!!
Editing for GPLshift0710
Re: Editing for GPLshift0710
Hi flybywire
In GPLshift.ini:
LookLRMaxAngle = 30 ;Just change it
"1.6" means using first (1st.) game controllers
7. button
See the game ctrl. list in windows (XP)
Start/Control Panel/Printer and Other hardware/Game Controllers/
e.g my could look like this
Controller......................Status
LT Joystick.......................OK (1.)
ACT GPL USB Shifter........OK (2.)
ACT LABS Perf. Pedals.....OK (3.)
ACT LABS FF Wheel.........OK (4.)
"ReCenterButton = 4.8" ;using AL Wheel 9. button
BTW: TrackIR software have also ReCenter button support with much easyer setup: e.g.
Go into Profiles/Default Profile/HotKeys/Change(Center F12) then press the button you want to use
Sorry for my english, I am Danish
JSJ
[ November 27, 2005, 03:49 AM: Message edited by: JSJ ]
In GPLshift.ini:
LookLRMaxAngle = 30 ;Just change it
"1.6" means using first (1st.) game controllers
7. button
See the game ctrl. list in windows (XP)
Start/Control Panel/Printer and Other hardware/Game Controllers/
e.g my could look like this
Controller......................Status
LT Joystick.......................OK (1.)
ACT GPL USB Shifter........OK (2.)
ACT LABS Perf. Pedals.....OK (3.)
ACT LABS FF Wheel.........OK (4.)
"ReCenterButton = 4.8" ;using AL Wheel 9. button
BTW: TrackIR software have also ReCenter button support with much easyer setup: e.g.
Go into Profiles/Default Profile/HotKeys/Change(Center F12) then press the button you want to use
Sorry for my english, I am Danish
JSJ
[ November 27, 2005, 03:49 AM: Message edited by: JSJ ]
Re: Editing for GPLshift0710
i cant get tir 4 working with gp legend. what do i need to do
Re: Editing for GPLshift0710
quote:Originally posted by snakeeyes:
i cant get tir 4 working with gp legend. what do i need to doDownload the new v0.711 (Fixed the TIR4 lost VE support)
In the GPLshift.ini file:
[ LOOK AROUND ]
LookAroundMode = 1.TIR ;Will enable the TrackIR3/4 VE support in GPL
...
LookLRMaxAngle = 30 ;Can changes! Try e.g with "45" to "60" (max. "122")
Let me known if you still have problems.
JSJ
www.gplshift.dk
i cant get tir 4 working with gp legend. what do i need to doDownload the new v0.711 (Fixed the TIR4 lost VE support)
In the GPLshift.ini file:
[ LOOK AROUND ]
LookAroundMode = 1.TIR ;Will enable the TrackIR3/4 VE support in GPL
...
LookLRMaxAngle = 30 ;Can changes! Try e.g with "45" to "60" (max. "122")
Let me known if you still have problems.
JSJ
www.gplshift.dk