Page 3 of 12

Re: No function in CFS3

Posted: Mon Oct 02, 2006 11:44 am
by Schnurx
If it is working with all the applications, I would narrow down the issue to CFS. Have you tried a reinstall?
Hello, thanks for the answer. Yes, of course I tried a de-/reinstall, about 4 times by now, using several different drives and install paths, just to be sure.

Re: No function in CFS3

Posted: Mon Oct 02, 2006 1:03 pm
by VincentG
Are you using the tir_attack_1_6 software. Not required for the newer hardware. Only needed for TrackIR 1 and 2.

You have updated to the latest CFS patch as well...

Re: No function in CFS3

Posted: Tue Oct 03, 2006 1:47 am
by Schnurx
Hi! No, I don't use TIR-Attack, didn't try it yet, as it doesn't seem to be necessary for other games.
Yes, I use the latest CFS3 Patch but I also tried it with the pure CFS out of the box, the 3.1 patch and the 3.1a patch.
Nothing seems to work.

Re: No function in CFS3

Posted: Tue Oct 03, 2006 9:43 am
by VincentG
What kind of motherboard are you using?

Re: No function in CFS3

Posted: Tue Oct 03, 2006 10:13 am
by VincentG
Also, have you tried an install of CFS3 on another system with the TrackIR unit?

Re: No function in CFS3

Posted: Wed Oct 04, 2006 5:00 am
by Schnurx
Hi Vincent,

thanks for the "responsiveness"

Some technical details:
I use an Asus A8V Deluxe Mainboard (AGP), an A64-3200, Geforce 6800 Ultra, 1 GB RAM. The Track-IR is connected directly to an USB-Port, not to a Hub.
A pretty much standard setup. As I don't have any problems with the Track-IR function in general, especially not in other games, I doubt that the problem is of a hardware-related nature.

To your other question: I might be able to do that, have to check later today if I can install CFS3 on my laptop. Didn't try yet, because it won't be looking or playing good, but for a test if TIR works that should be enough.

This should be interesting,because the lap HW/SW is totally different from my Game-PC. E.g. I'm running XP-professional, SP2 on the lap and 2k on my Game-PC.
I try tonight and keep you informed.

Re: No function in CFS3

Posted: Wed Oct 04, 2006 9:49 am
by VincentG
I ask, as I have seen CFS have issues with chipset and motherboard drivers.

Re: No function in CFS3

Posted: Wed Oct 04, 2006 11:12 pm
by Schnurx
I see. Well, my Mainboard and Chipset are very much standard fare, (VIA Hyperion drivers) nothing exotic.

I tested on my laptop yesterday.... surprise, it works.
So the problem seems to exist on my Gaming machine only.

Re: No function in CFS3

Posted: Thu Oct 05, 2006 12:23 pm
by VincentG
Check to make sure you have the latest motherboard bios update, and latest Via chipset drivers.

Re: No function in CFS3

Posted: Fri Oct 06, 2006 3:00 am
by Schnurx
Latest VIA Hyperion I got, I always install them when they come out. Latest Bios probably not, since it works perfectly I don't normally meddle with it. I'll check later.

It would be great if you could give me a list or something of dlls I might check for e.g. the necessary version or something.

I could also send you my system information, e.g. the DirectX Diagnosis and the System Info Diagnosis, if this would help.

Best regards