forums.naturalpoint.com

Are you using the clip pro, or the standard trackclip?

Looking at the camera view are the 3 green tracking objects centered, any red?

As you move, are the 3 green objects crossing overeach other?

...on a quick note...

the "Maximize to taskbar" is really starting
to annoy the heck out of me..

It's even faster/more efficient to bring up
task-manager, and end process than hunting
the TIR between task-and-tray to get it
maximized.

[quote=NaturalPoint - Vincent]
Are you using the clip pro, or the standard trackclip?

Looking at the camera view are the 3 green tracking objects centered, any red?

As you move, are the 3 green objects crossing overeach other? [/quote]


As stated, I am using the TrackClip PRO.
It's clipped onto the left side of my headphones.

The points never touch, but if I make them, the result
is very distinctive. This is not what I describe.

The lower point does change sides(Left/Right) with the center
dot

Question:
Is there a way to see what "offset" TrackIR *thinks* my
TrackClip PRO has? Perhaps if I tweak these numbers manually
I can force the tracker to correct values, (if this is what
is wrong).

Note 1:
I have not had this problem in previous builds.
I don't remember the exact build-number, but about 3-5 builds
ago. I think it was "TrackIR 5 Beta 3" or something like that.)

Note 2:
I do have a series of photos describing the Quirk".
If you're interested I could mail them.

[quote=Yammo]

The lower point does change sides(Left/Right) with the center
dot

[/quote]

Are you seeing a large center point, and smaller points to either side of the main IR points, when using the TrackClip Pro?

If so please email a screen shot, as well as your camera serial number to support.

[quote=NaturalPoint - Vincent]
[quote=Yammo]
The lower point does change sides(Left/Right) with the center
dot
[/quote]

Are you seeing a large center point, and smaller points to either side of the main IR points, when using the TrackClip Pro?

If so please email a screen shot, as well as your camera serial number to support.
[/quote]

I'm not sure what you are trying to describe.
But I see the 3 TIR points of my PRO-clip, in a vertical line.
However, since the diods are somewhat offset, turning the head
makes the lower diod traverse further than the center when I
rotate my head. As such, the lower diod will show up as being
either left or right of the center diod, but still "below".
...and never touching the center diod.

I nevertheless sent a mail to the support with pictures and
system information. I hope this will help.

Thank you.

...still no possible resume from hibernate.... camera works (led�s lighten up) but no response within the software...

Anybody else having this?

Greets
S@uDepp

Latest motherboard bios shipset drivers installed?

USB power saving turned off in the device manager?

Connected directly to the PC, or using a hub?

If you have trouble with the software launch ,
-rightclick shortcut
-select properties
-select Compatibility Tab
-check the "Disable desktop composition" box

Done, you are good to go.

This one is really odd.. When I run any version of the 5 software with my TIR5 it stops SLI mode. Triple checked it. It literally turns it off. As soon as I turn off the TIR SLI comes right back.

Slight update. Windowing the software just to show the profile seems to get rid of the problem for now

[quote=NaturalPoint - Vincent]Latest motherboard bios shipset drivers installed?

USB power saving turned off in the device manager?

Connected directly to the PC, or using a hub? [/quote]

1. latest drivers (as always ) installed

2. power saving for USB always disabled

3. directly connected

...... Software stays online, camera too (ir led�s) but there is no actual picture form the cameras perspective to be seen ..... I had to restart the software - than everything works fine... strange thing....
Nobody else got this issue?

Greets
S@uDepp