Tracking Tools feature in Motive: Define Rigid Body Centre
Tracking Tools feature in Motive: Define Rigid Body Centre
I have recently switched from Tracking Tools to Motive. In tracking tools I had the ability to select a specific marker to be the centre location of the rigid body. I cannot seem to find this feature in Motive, has it been removed? Is there an alternate way of doing this?
-
- Posts: 59
- Joined: Tue Nov 20, 2012 12:40 pm
Re: Tracking Tools feature in Motive: Define Rigid Body Cent
-Select the marker you wish to be the pivot point.
-Ctrl + select the rigid body so both the rigid body and marker you want to be the pivot point are selected.
-Right click and select Set Rigid Body Pivot Point.
-To reset pivot point to original location, right click and select Reset Pivot Point.
Please let us know if you have any other questions.
Brent Mason
Technical Sales Engineer
OptiTrack
-Ctrl + select the rigid body so both the rigid body and marker you want to be the pivot point are selected.
-Right click and select Set Rigid Body Pivot Point.
-To reset pivot point to original location, right click and select Reset Pivot Point.
Please let us know if you have any other questions.
Brent Mason
Technical Sales Engineer
OptiTrack