Page 1 of 1
Wire grid display is skewed several degrees
Posted: Sun Jun 21, 2015 4:05 pm
by bwpotter
I'm running TrackIR 5.2 and cannot seem to find a way to reset, or rotate, the wireframe grid so everything is square. The more I've dragged it with my mouse, the worse it's become!
Any thoughts or suggestions?
Thanks... Brian
Re: Wire grid display is skewed several degrees
Posted: Mon Jun 22, 2015 1:58 pm
by MikeWitham
bwpotter,
Are you talking about the grid to adjust the curves in the advanced settings menu, or the tracking grid in the Heads Up Display?
Regards,
Re: Wire grid display is skewed several degrees
Posted: Mon Jun 22, 2015 5:15 pm
by bwpotter
Hi Mike... I'm referring to the tracking grid in the heads up display. See attached.
Thanks... Brian
- trackir5_SkewedWireFrame.PNG (236 KiB) Viewed 3470 times
Re: Wire grid display is skewed several degrees
Posted: Tue Jun 23, 2015 2:38 pm
by bwpotter
Mike... I sent a reply yesterday, including a pic, but it's still not approved. To answer your question: yes, it's the tracking grid in the Heads Up Display.
Thx... Brian
Re: Wire grid display is skewed several degrees
Posted: Wed Jun 24, 2015 10:47 am
by MikeWitham
bwpotter,
Thank you for the photo. Have you tried right clicking on the grid and selecting 3D view and first person view?
Regards,
Re: Wire grid display is skewed several degrees
Posted: Wed Jun 24, 2015 10:53 am
by bwpotter
Yes, I've tried that several times but no luck.
Re: Wire grid display is skewed several degrees
Posted: Thu Jun 25, 2015 11:44 am
by MikeWitham
bwpotter,
I want you to close the TrackIR software. Then go to the install folder, usually it is located in C:\Program Files (x86)\NaturalPoint\TrackIR5. In there is a file named Settings.xml or just Settings. Please delete that and then restart the TrackIR and let me know if that resolved the issue.
Regards,
Re: Wire grid display is skewed several degrees
Posted: Thu Jun 25, 2015 12:41 pm
by bwpotter
Mike... that took care of it! Thank you for your help and assistance.
Regards... Brian