I thought I read somewhere that the smartnav 4 could be mounted using a standard camera type screw fitting. Is this correct?
If so how do you do this?
Mounting
-
- Posts: 1477
- Joined: Mon Nov 04, 2013 10:19 am
Re: Mounting
akell2,
Yes, if you remove the base there is a 6/32 thread mount. That is the standard for cameras and can be mounted on most new camera mounts.
Regards,
Yes, if you remove the base there is a 6/32 thread mount. That is the standard for cameras and can be mounted on most new camera mounts.
Regards,
Mike Witham
TrackIR Product Manager
TrackIR Product Manager
Re: Mounting
Hi Mike
Thanks for confirming that.
I tried to remove the base but could not seem to do it. Is there a spring clip to take out first, or do you just pull?
Many thanks,
Andrew
Thanks for confirming that.
I tried to remove the base but could not seem to do it. Is there a spring clip to take out first, or do you just pull?
Many thanks,
Andrew
-
- Posts: 1477
- Joined: Mon Nov 04, 2013 10:19 am
Re: Mounting
akell2,
There should be a metal pin that you pull out of the back. Once pulled out it releases the base.
Regards,
There should be a metal pin that you pull out of the back. Once pulled out it releases the base.
Regards,
Mike Witham
TrackIR Product Manager
TrackIR Product Manager
Re: Mounting
Hi Mike
Can you give me a clue please - I am sure it is easy when you know how - but I cannot get the mount off the camera!!
I have attached pic of smartnav. Thanks
Can you give me a clue please - I am sure it is easy when you know how - but I cannot get the mount off the camera!!
I have attached pic of smartnav. Thanks
- Attachments
-
- thumb_IMG_1520_1024.jpg (250.42 KiB) Viewed 5902 times
-
- Posts: 1477
- Joined: Mon Nov 04, 2013 10:19 am
Re: Mounting
akell2,
See the little metal clip in the recessed section, just under where it says Aspire? Use a hook to pull that out and it will release the base.
Regards,
See the little metal clip in the recessed section, just under where it says Aspire? Use a hook to pull that out and it will release the base.
Regards,
Mike Witham
TrackIR Product Manager
TrackIR Product Manager