Have installed this after a long absence, and its been store carefully.
The led's light, and the software sees the device.
Software status says camera detected and connected.
Red lights glowing.
the device (TIR3 #29791).
software is 5.4.2.7542.
tested on windows 7 ultimate SP1, 64bit and on windows 10, 64bit..
Tried it in two different USB2.0 and one sub 3.0 ports.
Using the hat clip, and this is selected.
Restarted several times, and on one occasion, i see the reflector spots, but , but they are stuck in a fixed position. Also the switch to turn off the led's does not work (not sure if this is a TIR3 feature though). Any advise welcome.
Oh, and the vector is not active (have requested support on this).
Regards,
Gerry (fish) Abbott.
TIR3 Camera not detecting anything
-
- Posts: 1477
- Joined: Mon Nov 04, 2013 10:19 am
Re: TIR3 Camera not detecting anything
Fish,
It should track fine after you receive your vector information. It won't do anything until it is activated.
Regards,
It should track fine after you receive your vector information. It won't do anything until it is activated.
Regards,
Mike Witham
TrackIR Product Manager
TrackIR Product Manager
Re: TIR3 Camera not detecting anything
Same thing here. TrackIR #34916
Win 10, latest software to date.
At the time I bought it (2008-ish) I don't remember ever having a 'vector serial'. The thing was just working fine.
Can you help fixing this ?
Thanks
Mathieu
Win 10, latest software to date.
At the time I bought it (2008-ish) I don't remember ever having a 'vector serial'. The thing was just working fine.
Can you help fixing this ?
Thanks
Mathieu
-
- Posts: 139
- Joined: Tue Aug 15, 2017 1:56 pm
Re: TIR3 Camera not detecting anything
Hello clertem,
If you have a TIR 3 camera, it requires an additional Vector Expansion license to use it with the latest Track IR software. They run $20. If you wish to purchase a one, please let me know and I will get you in touch with our sales team.
If you have a TIR 3 camera, it requires an additional Vector Expansion license to use it with the latest Track IR software. They run $20. If you wish to purchase a one, please let me know and I will get you in touch with our sales team.
All the Best,
Chris Johnson
Customer Support Engineer
NaturalPoint
Chris Johnson
Customer Support Engineer
NaturalPoint
-
- Posts: 2
- Joined: Tue May 19, 2020 8:10 am
Re: TIR3 Camera not detecting anything
Where can I buy a license for expansion vectors? My trackir3 is # 34789. Regards.
-
- Posts: 81
- Joined: Wed Mar 04, 2020 9:53 am
Re: TIR3 Camera not detecting anything
Jon Campbell
Customer Support Engineer
TrackIR
NaturalPoint
Customer Support Engineer
TrackIR
NaturalPoint