different cameras

Post Reply
Posts: 4
Joined: Mon Dec 12, 2016 7:06 pm

different cameras

Post by supercourgette » Tue Aug 28, 2018 2:54 am

I would like to know if it's possible to use a setup with differents cameras (13 and 17w) and use them together in motive. I'm asking because I tried this morning and I got some artefact, while it seems to be working the 17w cameras view seems to be extended (lhe texture was repeated in the preview window). Thank you for your help.

NaturalPoint Employee
NaturalPoint Employee
Posts: 473
Joined: Mon Jan 19, 2015 11:52 am

Re: different cameras

Post by steven.andrews » Tue Aug 28, 2018 11:33 am

Hi supercourgette,

Working with a mix of camera types is ok, and something that is done often. The setup and calibration process is the same, though you will usually want to pay attention to the different fields of view, strategically placing the cameras for good coverage.

If the calibration was not a good one, you may want to review the Wand Wave take. Make sure the wand wave looks clean, and that there are no extreme extra reflections that should not be there. When mixing camera types, you sometimes need to give the cameras different settings.
If you continue to struggle with this, feel free to reach out to us directly, and to provide the take file for us to review.

Steven Andrews
OptiTrack | Senior Customer Support Engineer

Posts: 1
Joined: Wed Jan 02, 2019 4:16 am
Location: Australia

Re: different cameras

Post by Daisymartin » Wed Jan 02, 2019 5:03 am

Do any external cameras are available for a mobile phone?

Post Reply