Active Pattern Depth
Posted: Mon May 17, 2021 8:18 am
I am working with a system that has 36 cameras which will be tracking ~25 HTC Vive Pro headsets and ~50 HTC Vive Controllers. As I set up all the rigidbodies last week, I noticed a lot of flickering beginning when all were turned on. I also noticed strange rb behavior when they were initially created (one marker on a newly created rb thought it was part of an existing rb so the new one had a stretching effect). I even had issues finding all 8 markers for each rb as more and more were getting added.
I am under the assumption that increasing the Active Pattern Depth setting will fix this, but I am wondering what I should set it to and what the downsides are to setting it all the way to 32. There must be a reason the default value is 12.
If anyone can help out that would be great!
I am under the assumption that increasing the Active Pattern Depth setting will fix this, but I am wondering what I should set it to and what the downsides are to setting it all the way to 32. There must be a reason the default value is 12.
If anyone can help out that would be great!