Bug reports
Posted: Thu Jul 07, 2022 8:34 am
Hello folks,
just letting you know there is a reproducable issue with some cameras being inactive after starting up motive 3.0.1 (in our case with 12 PrimeX 13)
Cameras which don't receive data vary every time and the bug can be resolved by altering the threshold value. (e.g. set to 201 and back to 200)
We also can confirm the dropouts mentioned in another topic, sometimes the signal from all cameras is lost for 1-2 frames.
Another phenomenon is the hyper-extension of elbows (handstand, flare or similar motions with hand+floor contact) - is there a way to restrict the motion range or a recommended setting for fine tuning/reconstruction/solving?
Hope some veterans can jump in and have a look.
All the best
AM
just letting you know there is a reproducable issue with some cameras being inactive after starting up motive 3.0.1 (in our case with 12 PrimeX 13)
Cameras which don't receive data vary every time and the bug can be resolved by altering the threshold value. (e.g. set to 201 and back to 200)
We also can confirm the dropouts mentioned in another topic, sometimes the signal from all cameras is lost for 1-2 frames.
Another phenomenon is the hyper-extension of elbows (handstand, flare or similar motions with hand+floor contact) - is there a way to restrict the motion range or a recommended setting for fine tuning/reconstruction/solving?
Hope some veterans can jump in and have a look.
All the best
AM