Hello,
We have been testing the synchronization between Motive 2.1.1 and two NI-DAQ systems (NI USB-6341 (BNC), NI-DAQmx 21.3).
We are using the reference clock sync setup from Optitrack Wiki using the eSync 2 synchronization device. The Motive MoCap is the master and the NI-DAQ systems are the slaves.
https://v22.wiki.optitrack.com/index.ph ... ion:_eSync
We have found that delays between Motive and NI-DAQ systems range from -0.005 to 0.08s (200Hz Sample Rate) with no apparent patterns.
As this has been reported somewhere else, has anyone found a solution to this problem? Or does anyone know how to resolve this problem?
Thank you for your time,
Gary
Synchronization delays between Motive and Ni-DAQ
-
- Posts: 1
- Joined: Thu May 25, 2023 5:43 am